Bio Plas

  • sale

  • price

  • brand

  • store

  • Clear all
Refine By
Bio Plas
$43.70

Secure lid closure with the MULTICAP TOOL, Cat. #5050-15, assisting in the closing and opening and prevents aerosolizing0.5 mL Fro...sted Flat Cap surface for sample inscriptionTubes fabricated from virgin polypropyleneHighly polished inner surface allows for maximum sample recoveryTubes are autoclavable at 121 degrees C, 15 PSI for 15 minutes - Remove tubes from autoclave immediatelyColor: - Blue- SKU: BIPS150 read more

Bio Plas
$69.52

Caps for C2817 Bio Plas screwcap microcentrifuge tubes. O-ring inside microcentrifuge tube screw caps forms a secure and leakproof... seal- SKU: BIPS087 read more

Bio Plas
$24.16

Uni-Flex Safety Caps are available for a wide range of biomedical and industrial applications. The Uni-Flex Safety Cap liquid tigh...t seal ensures sample integrity and prevents spillage of serum samples. Uni-Flex Safety Caps protect your laboratory staff from the aerosols of highly infectious organisms such as TB and the HTLV-III virus. Color: green- SKU: BIPS219 read more

Bio Plas
$23.60

Bio Plas Tube Snpcp Mcentr 1-8ML PK1000 4157 is one of the many quality laboratory and scientific products we have to offer at ver...y competitive pricing- Bio Plas Tube Snpcp Mcentr 1-8ML PK1000 4157 / 21150-348 is part of a wide selection of Bio Plas Microcentrifuge tubes-Combining excellent quality with an affordable price, the Bio Plas Tube Snpcp Mcentr 1-8ML PK1000 4157 / 21150-348 can meet your scientific research needs while still offering a good value for a budget conscious end user- If you have any questions about any of our Microcentrifuge tubes please do not hesitate to contact our customer service for further guidance-Snap-Cap Microcentrifuge Tube- Volume: 1-8mL- Tough virgin polypropylene construction withstands rugged G-forces of high speed centrifugation- Snap-Cap attached to each tube- Entire unit autoclavable at 121C at 15psi for 15 minutes- Color: yellow- SKU: BIPS052 read more

Bio Plas
$17.37

Color: RedThe G-Tubeâ ¢ is virtually transparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tubeâ ¢ ca...p is closed there will be an audible "snap" that indicates a secure closure has been formed. Made of tough, clear, propietarily formulated polypropylene, the G-Tubeâ ¢ has the same chemical resistant quality as standard tubes but they;re sturdier and virtually transparent to give a better view. The flat top cap is easy to open and still provides a maximum secure seal. The G-Tubeâ ¢ is built for high impact usage and will withstand over 30,000 x g when spun. Thicker walls make this the tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. The G-Tubeâ ¢ will withstand temperature ranges of -80 °C (-112 °F) to 121 °C (250 °F)- SKU: BIPS037 read more

Bio Plas
$16.42

Capacity: 0.5mL; color: yellowMicrocentrifuge tube is made of polypropylene for excellent chemical resistant qualities and good cl...arityFlat top cap provides a positive and secure seal when closed, providing maximum protection for contentsHigh impact strength; will withstand 17000RPM and 13000 x g centrifugationGraduated tube has a textured writing surface on the top and side; autoclavableManufacturer: Bio PlasManufacturer Part No: BP-4317- SKU: BIPS118 read more

Bio Plas
$54.47

Our Snap-Cap tube gives a firm, dependable seal, and its tough virgin-polypropylene construction withstands the rugged G-forces of... high-speed centrifugation- Use it with confidence for specimen collection, mixing, electrophoresis sampling/handling, enzyme assays, radioassays, immumoassays and many other applications-The Snap-Cap tubes smooth, conical interior lets you remove your entire sample with ease, and without material hangup- You can even cut it to remove a spun pellet- The Snap-Cap is attached to each tube, and the entire unit is autoclavable at 250F at 15 psi for 15 minutes- Fits Beckman, Eppendorf and all other microcentrifuges- SKU: BIPS012 read more

Bio Plas
$16.20

Capacity: 1.5mL; color: amberMicrocentrifuge tube is made of polypropylene for excellent chemical resistant qualities and good cla...rityFlat top cap provides a positive and secure seal when closed, providing maximum protection for contentsHigh impact strength; will withstand 17000RPM and 13000 x g centrifugationGraduated tube has a textured writing surface on the top and side; autoclavableManufacturer: Bio PlasManufacturer Part No: BP-4305- SKU: BIPS112 read more

Bio Plas
$41.69

The extraordinary strength, safety and reliability of our Screw-Cap tube lets you perform procedures that simply canâ t be done wi...th other tubes. Spin it, store it, transport it (even by air). Boil it, irradiate it, immerse it in the vapor phase of liquid nitrogen-itâ ll stand up to the test! Inside the screw cap, our ethylene propylene O-Ring formsa secure and leakproof seal. Our screw capâ s square threads wonâ t strip-and theyâ re on the outside of the tube, so you minimize the risk of contaminating your sample-or letting it contaminate you. Our Screw-Cap tube is ideal for any sample-processing or storage application imaginable-and especially for working with valuable or hazardous cells and materials- SKU: BIPS089 read more

Bio Plas
$25.47

Capacity: 1.5mL; color: orangeMicrocentrifuge tube is made of polypropylene for excellent chemical resistant qualities and good cl...arityFlat top cap provides a positive and secure seal when closed, providing maximum protection for contentsHigh impact strength; will withstand 17000RPM and 13000 x g centrifugationGraduated tube has a textured writing surface on the top and side; autoclavableManufacturer: Bio PlasManufacturer Part No: BP-4306 read more

Bio Plas
$72.67

O-ring inside microcentrifuge tube screw caps forms a secure and leakproof seaScrew cap color: orangeScrew caps have outer square ...threads which won;t strip; minimizes the risk of contaminating your sample - or letting it contaminate lab personnelIdeal for freezer storage, boiling, autoclaving and irradiationBio Plas Part Number: 4221R1000/Pack; 10 Packs/CaseManufacturer: Bio PlasManufacturer Part No: BP-4221R- SKU: BIPS100 read more

Bio Plas
$24.16

Features of the Bio Plas Uni-Flex Safety Caps for 10mm Blood Collecting & Culture Tube: Now thereâ s a safe, economical way to cap... and recap blood collection tubes and disposable glass culture tubes, regardless of manufacturer. Uni-Flexâ ¢ Safety Caps are available for a wide range of biomedical and industrial applications. The Uni-Flexâ ¢ Safety Cap liquid tight seal ensures sample integrity and prevents spillage of serum samples. Uni-Flexâ ¢ Safety Caps are available in several colors which helps guard against sample cross-contamination and is convenient for color-coding to particular R projects. Uni-Flexâ ¢ Safety Caps protect your laboratory staff from the aerosols of highly infectious organisms such as TB and the HTLV-III virus. Color: whiteWill not aerosol when opened!110, 12, 13 and 16mm sizes fit all varieties of blood collecting and disposable culture tubes. Liquid tight seal prevents sample evaporation. The Uni-Flexâ ¢ Safety Cap is designed to hold under centrifugation, agitation, refrigeration and freezing. Easy identification of samples. Uni-Flexâ ¢ Safety Caps are available in seven colors that conveniently correspond to blood collection cap colors. Stretchable, unique over-locking design is far superior to Parafilmâ ¢. Locks securely onto the outside of the tube lip to prevent evaporation. Easy, one hand removal and application. To close, press down firmly with thumb to lock in place. To open, simply pry cap up with thumb. Easy to label. Write directly on the cap with indelible ink. Clear, natural colored caps are trace-metal free. OEM product packaging- SKU: BIPS195 read more

Bio Plas
$38.07

Our Snap-Cap tube gives a firm, dependable seal, and its tough virgin-polypropylene construction withstands the rugged G-forces of... high-speed centrifugation. Use it with confidence for specimen collection, mixing, electrophoresis sampling/handling, enzyme assays, radioassays, immumoassays and many other applications. The Snap-Cap tubeâ s smooth, conical interior lets you remove your entire sample with ease, and without material hangup. You can even cut it to remove a spun pellet. The Snap-Cap is attached to each tube, and the entire unit is autoclavable at 250 °F at 15 psi for 15 minutes. Fits Beckman, Eppendorf and all other microcentrifuges- SKU: BIPS015 read more

Bio Plas
$33.03

This natural-colored 0.5mL siliconized microcentrifuge tube features low surface adhesion. It is ideal for protein or nucleic acid... studies to prevent any possible loss of sample due to adherence to the inner walls of the microcentrifuge tube, thus allowing complete sample recovery. This is the preferred tube for procedures such as cDNA library synthesis, RNA isolation, and protein assays. This tube has a positive cap seal design providing safe, reliable, secure fit and will remain so for repeated cap closures. Cap is flat with a textured surface on top for easy identification. The tight seal closure eliminates accidental opening during incubation or spinning- SKU: BIPS125 read more

Bio Plas
$25.47

Capacity: 1.5mL; color: greenMicrocentrifuge tube is made of polypropylene for excellent chemical resistant qualities and good cla...rityFlat top cap provides a positive and secure seal when closed, providing maximum protection for contentsHigh impact strength; will withstand 17000RPM and 13000 x g centrifugationGraduated tube has a textured writing surface on the top and side; autoclavableManufacturer: Bio PlasManufacturer Part No: BP-4304- SKU: BIPS111 read more

Bio Plas
$25.61

The Hexa-Flex liquid-tight seal ensures sample integrity and prevents spillage of serum samples. Hexa-Flex Safety Caps are availab...le in a variety of colors which helps guard against sample cross-contamination and is convenient for color-coding to particular R projects. Hexa-Flex Safety Caps protect your laboratory staff from highly-infectious organisms such as TB and the HTLV-III virus. Color: yellow- SKU: BIPS233 read more

Bio Plas
$23.84

Bio Plas Tube Snpcp Mcentr 1.8ML PK1000 4155 is one of the many quality laboratory and scientific products we have to offer at ver...y competitive pricing. Bio Plas Tube Snpcp Mcentr 1.8ML PK1000 4155 / 21150-344 is part of a wide selection of Bio Plas Microcentrifuge tubes. Combining excellent quality with an affordable price, the Bio Plas Tube Snpcp Mcentr 1.8ML PK1000 4155 / 21150-344 can meet your scientific research needs while still offering a good value for a budget conscious end user. If you have any questions about any of our Microcentrifuge tubes please do not hesitate to contact our customer service for further guidance. Snap-Cap Microcentrifuge Tube. Volume: 1.8mL. Tough virgin polypropylene construction withstands rugged G-forces of high speed centrifugation. Snap-Cap attached to each tube. Entire unit autoclavable at 121 °C at 15psi for 15 minutes. Color: natural- SKU: BIPS050 read more

Bio Plas
$151.44

Keyed Rack 40 Place 1/PKBio Plas - 40 Place Keyed Rack, Anodized Aluminum Color: Aluminum 1 per pack. 1 pacls per case- SKU: BIPS0...85 read more

Bio Plas
$40.72

Color: orangeScrew-cap onlyFor microcentrifuge tubesMade of polypropyleneSquare threads fit on the outside of the tube to minimize... the risk of contaminating the sample; won;t stripManufacturer: Bio PlasManufacturer Part No: BP-4221- SKU: BIPS099 read more

Bio Plas
$42.09

Color: amberScrew-cap onlyFor microcentrifuge tubesMade of polypropyleneSquare threads fit on the outside of the tube to minimize ...the risk of contaminating the sample; won;t stripManufacturer: Bio PlasManufacturer Part No: BP-4224- SKU: BIPS105 read more

Bio Plas
$35.26

The Hexa-Flex liquid-tight seal ensures sample integrity and prevents spillage of serum samples. Hexa-Flex Safety Caps are availab...le in a variety of colors which helps guard against sample cross-contamination and is convenient for color-coding to particular R projects. Hexa-Flex Safety Caps protect your laboratory staff from highly-infectious organisms such as TB and the HTLV-III virus. Color: blue- SKU: BIPS231 read more

Bio Plas
$16.55

Color: GreenThe G-Tubeâ ¢ is virtually transparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tubeâ ¢ ...cap is closed there will be an audible "snap" that indicates a secure closure has been formed. Made of tough, clear, proprietarily formulated polypropylene, the G-Tubeâ ¢ has the same chemical resistant quality as standard tubes but they;re sturdier and virtually transparent to give a better view. The flat top cap is easy to open and still provides a maximum secure seal. The G-Tubeâ ¢ is built for high impact usage and will withstand over 30,000 x g when spun. Thicker walls make this the tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. The G-Tubeâ ¢ will withstand temperature ranges of -80 °C (-112 °F) to 121 °C (250 °F)- SKU: BIPS031 read more

Bio Plas
$23.60

Bio Plas Mct Polypro Blu 1.8ML 1000/PK 4158 is one of the many quality laboratory and scientific products we have to offer at very... competitive pricing. Bio Plas Mct Polypro Blu 1.8ML 1000/PK 4158 / 21150-350 is part of a wide selection of Bio Plas Microcentrifuge tubes. Combining excellent quality with an affordable price, the Bio Plas Mct Polypro Blu 1.8ML 1000/PK 4158 / 21150-350 can meet your scientific research needs while still offering a good value for a budget conscious end user. If you have any questions about any of our Microcentrifuge tubes please do not hesitate to contact our customer service for further guidance- SKU: BIPS053 read more

Bio Plas
$25.41

Tissue is taken from the capsules and placed into stain-less steel or plastic base molds. The labeled ring is placed atop the base... mold, filled with paraffin and cooled. The rings allow for a uniform block and are readily identified when filled. Available in 5 colors for color coding in the laboratoryColor: - Green- SKU: BIPS162 read more

Bio Plas
$21.44

Autoclavable, non-breakable (eliminates glasshazard)30mm head for prepared bi-plates60mm head for 100-150mm prepared platesSturdy ...plastic provides uniform designEasy to manipulate without slippageEasy to manipulate around curves and into cornersof prepared platesAvoids waste of â disposablesâ thus becoming anenvironmental benefitAlways prevents agar surface tearsAllows for even distribution of specimenProduces an even smear for any permanent slidestaining, i.e, PVA preserved fecal specimen forprotozoan parasitesMicrobiological research of all types, especially fordistribution of dilutions, i.e, colony counts. Color: - BlueThe BIO PLAS BACTI CELL SPREADERS are unique products designed to greatly simplify and speed up bacterialculture work. There are two sizes: 30mm and 60mm wide, which allow these polypropylene BACTI CELL SPREADERS to make it very easy to evenly distribute bacterial cells rapidly over an entire nutrient surface. The BIO PLAS BACTI CELL SPREADERS are individually wrapped (or available in bulk) and may be cleaned andautoclaved for multiple uses- SKU: BIPS191 read more

Bio Plas
$34.11

Color: - Fluorescent AssortedDesigned as preparation and storage racks for any variety of 0.2mL tubes and strip caps before and af...ter sample processing applicationsFormatted in the standard 8 x 12 microtiter formatIdentified "A" through "H" vertically, and 1 through 12 horizontally, providing convenient and error free tube identificationTransparent plastic cover with new "slip edge" allowing safe- SKU: BIPS010 read more

Bio Plas
$26.05

The FOAM BIOPSY PADS are fabricated from cellular polyester plastic foam which is manufactured uniformly with air pockets througho...ut to allow for adequate fluid movement around the tissue while it is securely sandwiched between two pads. This assures the orientation of small biopsy tissue. Available in sizes to fit TISSUE PROCESSING CAPSULES and CAPSETTESâ ¢Color: - Blue- SKU: BIPS186 read more

Bio Plas
$45.07

Secure lid closure with the MULTICAP TOOL, Cat. #5050-15, assisting in the closing and opening and prevents aerosolizing0.5 mL Fro...sted Flat Cap surface for sample inscriptionTubes fabricated from virgin polypropyleneHighly polished inner surface allows for maximum sample recoveryTubes are autoclavable at 121 degrees C, 15 PSI for 15 minutes - Remove tubes from autoclave immediatelyColor: - Red- SKU: BIPS148 read more

Bio Plas
$24.00

Bio Plas Mct Polypro Red 1.8ML 1000/PK 4156 is one of the many quality laboratory and scientific products we have to offer at very... competitive pricing. Bio Plas Mct Polypro Red 1.8ML 1000/PK 4156 / 21150-346 is part of a wide selection of Bio Plas Microcentrifuge tubes. Combining excellent quality with an affordable price, the Bio Plas Mct Polypro Red 1.8ML 1000/PK 4156 / 21150-346 can meet your scientific research needs while still offering a good value for a budget conscious end user. If you have any questions about any of our Microcentrifuge tubes please do not hesitate to contact our customer service for further guidance- SKU: BIPS051 read more

Bio Plas
$20.13

Color: RainbowThe G-Tubeâ ¢ is virtually transparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tubeâ ...¢ cap is closed there will be an audible "snap" that indicates a secure closure has been formed. Made of tough, clear, propietarily formulated polypropylene, the G-Tubeâ ¢ has the same chemical resistant quality as standard tubes but they;re sturdier and virtually transparent to give a better view. The flat top cap is easy to open and still provides a maximum secure seal. The G-Tubeâ ¢ is built for high impact usage and will withstand over 30,000 x g when spun. Thicker walls make this the tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. The G-Tubeâ ¢ will withstand temperature ranges of -80 °C (-112 °F) to 121 °C (250 °F)- SKU: BIPS044 read more

Bio Plas
$71.31

Caps for C2817 Bio Plas screwcap microcentrifuge tubes. O-ring inside microcentrifuge tube screw caps forms a secure and leakproof... seal- SKU: BIPS094 read more

Bio Plas
$26.39

Tissue is taken from the capsules and placed into stain-less steel or plastic base molds. The labeled ring is placed atop the base... mold, filled with paraffin and cooled. The rings allow for a uniform block and are readily identified when filled. Available in 5 colors for color coding in the laboratoryColor: - Yellow- SKU: BIPS160 read more

Bio Plas
$26.28

The Hexa-Flex liquid-tight seal ensures sample integrity and prevents spillage of serum samples. Hexa-Flex Safety Caps are availab...le in a variety of colors which helps guard against sample cross-contamination and is convenient for color-coding to particular R projects. Hexa-Flex Safety Caps protect your laboratory staff from highly-infectious organisms such as TB and the HTLV-III virus. Color: green- SKU: BIPS230 read more

Bio Plas
$42.09

Screw Cap for Microtube /PKBio Plas - Screw Cap for Bio Plas Screw Cap Microcentriufge Tubes Color: Red 1000 per pack. 10 pacls pe...r case- SKU: BIPS093 read more

Bio Plas
$24.16

Now thereâ s a safe, economical way to cap and recap blood collection tubes and disposable glass culture tubes, regardless of manu...facturer. Uni-Flexâ ¢ Safety Caps are available for a wide range of biomedical and industrial applications. The Uni-Flexâ ¢ Safety Cap liquid tight seal ensures sample integrity and prevents spillage of serum samples. Uni-Flexâ ¢ Safety Caps are available in several colors which helps guard against sample cross-contamination and is convenient for color-coding to particular R projects. Uni-Flexâ ¢ Safety Caps protect your laboratory staff from the aerosols of highly infectious organisms such as TB and the HTLV-III virus. Color: greenWill not aerosol when opened!110, 12, 13 and 16mm sizes fit all varieties of blood collecting and disposable culture tubes. Liquid tight seal prevents sample evaporation. The Uni-Flexâ ¢ Safety Cap is designed to hold under centrifugation, agitation, refrigeration and freezing. Easy identification of samples. Uni-Flexâ ¢ Safety Caps are available in seven colors that conveniently correspond to blood collection cap colors. Stretchable, unique over-locking design is far superior to Parafilmâ ¢. Locks securely onto the outside of the tube lip to prevent evaporation. Easy, one hand removal and application. To close, press down firmly with thumb to lock in place. To open, simply pry cap up with thumb. Easy to label. Write directly on the cap with indelible ink. Clear, natural colored caps are trace-metal free. OEM product packaging- SKU: BIPS212 read more

Bio Plas
$24.16

Uni-Flex Safety Caps are available for a wide range of biomedical and industrial applications. The Uni-Flex Safety Cap liquid tigh...t seal ensures sample integrity and prevents spillage of serum samples. Uni-Flex Safety Caps protect your laboratory staff from the aerosols of highly infectious organisms such as TB and the HTLV-III virus. Color: blue- SKU: BIPS206 read more

Bio Plas
$25.41

Tissue is taken from the capsules and placed into stainless steel or plastic base molds- The labeled Embedding Ring is placed atop... the base mold, filled with paraffin and cooled-The rings allow for a uniform block and are readily identified when filled- Available in 3 colors for color coding in the laboratory- Color: - Pink- SKU: BIPS161 read more

Bio Plas
$16.96

The G-Tube is virtually transparent and far exceeds the toughness of any microcentrifuge tubes- When the G-Tube cap is closed ther...e will be an audible "snap" that indicates a secure closure has been formed-Made of tough, clear, specially formulated polypropylene, the 0-6mL, 1-5mL and 2-0mL G-Tube has the same chemical resistant quality as standard tubes but they're sturdier and virtually transparent to give a better view- The flat top cap is easy to open and still provides a maximum secure seal-The G-Tube is built for high impact usage and will withstand over 30,000 x g when spun- Thicker walls make this the tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing- Will withstand temperature ranges of -80C (-112F) to 121 C (250F)- Color: Lavender- Lid Closure The flat top lid forms an extra-tight seal that will not come open during processing- Yet, it's easy to open with thumb pressure or our handy MicroTube Tool (catalog #4000-)- Inscribing Patches All flat top tubes have a textured writing surface on top of the caps- The 1-5ml and 2-OmL tubes have an additional textured writing surface on the side of the tubes- Graduation The 1-5ml tube is graduated from 0-1 to 1-5ml- The 2-0ml tube is graduated from 0-1 to 2-0ml- Finish- The interior has the smoothest, most highly polished surface of any tube on the market- The walls are non-wettable, preventing liquids from adhering to the sides- Needle Access You can easily insert a needle through the target in the exact center of the lid- SKU: BIPS023 read more

Bio Plas
$24.16

Now thereâ s a safe, economical way to cap and recap blood collection tubes and disposable glass culture tubes, regardless of manu...facturer. Uni-Flexâ ¢ Safety Caps are available for a wide range of biomedical and industrial applications. The Uni-Flexâ ¢ Safety Cap liquid tight seal ensures sample integrity and prevents spillage of serum samples. Uni-Flexâ ¢ Safety Caps are available in several colors which helps guard against sample cross-contamination and is convenient for color-coding to particular R projects. Uni-Flexâ ¢ Safety Caps protect your laboratory staff from the aerosols of highly infectious organisms such as TB and the HTLV-III virus. Color: lavenderWill not aerosol when opened!110, 12, 13 and 16mm sizes fit all varieties of blood collecting and disposable culture tubes. Liquid tight seal prevents sample evaporation. The Uni-Flexâ ¢ Safety Cap is designed to hold under centrifugation, agitation, refrigeration and freezing. Easy identification of samples. Uni-Flexâ ¢ Safety Caps are available in seven colors that conveniently correspond to blood collection cap colors. Stretchable, unique over-locking design is far superior to Parafilmâ ¢. Locks securely onto the outside of the tube lip to prevent evaporation. Easy, one hand removal and application. To close, press down firmly with thumb to lock in place. To open, simply pry cap up with thumb. Easy to label. Write directly on the cap with indelible ink. Clear, natural colored caps are trace-metal free. OEM product packaging- SKU: BIPS211 read more

Bio Plas
$47.18

Our Screw-Cap Microcentrifuge Tube is ideal for any sample-processing or storage application imaginable-and especially for working... with valuable or hazardous cells and materials. The extraordinary strength, safety and reliability of the Screw-Cap Microcentrifuge Tube lets you perform procedures that simply can;t be done with other tubes. Spin it, store it, transport it (even by air). Boil it, irradiate it, immerse it in the vapor phase of liquid nitrogen-it;ll stand up to the test! Color: - Natural- SKU: BIPS069 read more

Bio Plas
$40.72

This screw-cap for microcentrifuge tubes is made of polypropylene. Square threads fit on the outside of the tube to minimize the r...isk of contaminating the sample and won;t strip. Screw-Cap Only. Material: Ethylene Propylene- SKU: BIPS103 read more

Bio Plas
$20.56

Tube Adapter RingBio Plas - Microcentrifuge Tube Adapter Ring Color: Natural 20 per pack. 1 pacls per case- SKU: BIPS084

Bio Plas
$11.85

Color: Blue/NaturalDisposableMade from PolypropyleneRNase, DNase freeSterilizedPre-packaged with appropriate sized tubeCase of 250...- SKU: BIPS027 read more

Bio Plas
$34.11

Color: - Fluorescent OrangeDesigned as preparation and storage racks for any variety of 0.2mL tubes and strip caps before and afte...r sample processing applicationsFormatted in the standard 8 x 12 microtiter formatIdentified "A" through "H" vertically, and 1 through 12 horizontally, providing convenient and error free tube identificationTransparent plastic cover with new "slip edge" allowing safe- SKU: BIPS007 read more

Bio Plas
$18.02

Color: AmberThe G-Tubeâ ¢ is virtually transparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tubeâ ¢ ...cap is closed there will be an audible "snap" that indicates a secure closure has been formed. Made of tough, clear, propietarily formulated polypropylene, the G-Tubeâ ¢ has the same chemical resistant quality as standard tubes but they;re sturdier and virtually transparent to give a better view. The flat top cap is easy to open and still provides a maximum secure seal. The G-Tubeâ ¢ is built for high impact usage and will withstand over 30,000 x g when spun. Thicker walls make this the tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. The G-Tubeâ ¢ will withstand temperature ranges of -80 °C (-112 °F) to 121 °C (250 °F)- SKU: BIPS043 read more

Bio Plas
$34.52

Color: -Fluorescent GreenDesigned as preparation and storage racks for any variety of 0.2mL tubes and strip caps before and after ...sample processing applicationsFormatted in the standard 8 x 12 microtiter formatIdentified "A" through "H" vertically, and 1 through 12 horizontally, providing convenient and error free tube identificationTransparent plastic cover with new "slip edge" allowing safe- SKU: BIPS006 read more

Bio Plas
$16.02

This microcentrifuge tube features a flat top cap which provides a positive and secure seal when closed, thus providing maximum pr...otection for contents. Fabricated with virgin polypropylene for excellent chemical resistant qualities and good clarity. The tube has high impact strength and will withstand 17000RPM and 13000 x g centrifugation. Thicker walls make this the tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance, and freezing. This microcentrifuge tube has a textured writing surface on top of the cap and on the side of the tube. It is graduated from 0.1, 0.25, 0.5, 1.0, and 1.5mL. The interior has the smoothest, most highly polished surface of any tube on the market. The walls are non-wettable, preventing contents from adhering to the side walls. Needle access is fast and easy through the target in the exact center of the lid. Autoclavable. Chemical Resistant. Graduated. Material: Polypropylene. Top Style- SKU: BIPS109 read more

Bio Plas
$23.58

Color: LavenderThe G-Tubeâ ¢ is virtually transparent and far exceeds the toughness of any microcentrifuge tubes. When the G-Tubeâ... ¢ cap is closed there will be an audible "snap" that indicates a secure closure has been formed. Made of tough, clear, propietarily formulated polypropylene, the G-Tubeâ ¢ has the same chemical resistant quality as standard tubes but they;re sturdier and virtually transparent to give a better view. The flat top cap is easy to open and still provides a maximum secure seal. The G-Tubeâ ¢ is built for high impact usage and will withstand over 30,000 x g when spun. Thicker walls make this the tube of choice for extreme stress, high spinning speeds, autoclaving, boiling, chemical resistance and freezing. The G-Tubeâ ¢ will withstand temperature ranges of -80 °C (-112 °F) to 121 °C (250 °F)- SKU: BIPS042 read more