Hejnar Photo Camera Bags & Accessories

Refine By
Hejnar Photo
$65.00

Standard 4.00 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two outs...ide holes are taped 1/4-20 and 45mm apart from each other.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$65.00

Multipurpose 10.00 inch rail with three (3) captive style slots and engraved metric scale. Rail can be used as: Macro Rail, Lens P...late, Single or multiple Flash support in combination with Flash Shoe Mount. Long lens support- combine with lens support rail. read more

Hejnar Photo
$65.00

Standard 3.25 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two outs...ide holes are taped 1/4-20 and 45mm apart from each other.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$120.00

8 inch lens support package with quick height adjustment includes a special 8 inch rail (G013-80), lens support bracket (LLSB), an...d 1.50 inch clamp (F61b). The clamp is mounted to the rail end with a single screw. To prevent the clamp from accidental rotation, a standard 5mm dowel pin is inserted into an opening on the end of the rail. The lens supporting bracket is mounted inside the clamp for quick height adjustment, useful when you are using multiple lenses with your camera. This setup can dramatically improve the stability of your camera/lens combo. Bracket Specifications: 3.75 inches long. 2.50 inches wide. Weight: 2.70 oz (76g). One captive style slot. Double-dovetail design allows for dual clamping surfaces. Can be used with various lenses. Rail Specifications: 8.00 inches long. 1.50 inches wide. 1/2 inch thick. Weight: 4.1 oz (115g). Engraved metric scale. 1/4-20 tapped hole in front for lens support or other accessories. Three captive style slots read more

Hejnar Photo
$65.00

Standard4.00 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two outsi...de holes are taped 1/4-20 and 45mm apart from each other.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$45.00

Standard 1.50 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Tongue-i...n-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Made in USA. read more

Hejnar Photo
$65.00

Standard 4.8 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two Side ...holes are threaded 3/8-16 and spaced 35 mm from each other. Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$60.00

2.00 inch lens support bracket with standard bar and 1.150 diameter wheels. Assembly of 2 inch rail, supporting bar, and wheels se...t can be used to improve the stability of your lens barrel. The lens support bracket can be used in combination with various rails to improve the stability of your lens barrel. The rail should have a 1/4-20 tapped hole on the end in order to mount the support bracket. If you use the bracket with various lenses you can mount a clamp onto the rail for quick height adjustments. read more

Hejnar Photo
$150.00

8 inch lens support package with quick height adjustment includes an 8 inch rail (G010-80), lens support bracket (LLSB), and 2.375... inch clamp (F62). This setup can dramatically improve the stability of your camera/lens combo. read more

Hejnar Photo
$65.00

Standard 2.375 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two out...side holes are taped 1/4-20 and 30mm apart from each other.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$45.00

Multipurpose 5.00 inch rail with three (3) captive style slots and engraved metric scale. Rail can be used as: Macro Rail, Lens Pl...ate, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$38.00

Two inch plate with one strap loop. Double-dovetail design allows for dual clamping surfaces. One captive style slot. Two safety s...top screws. This prevents free fall when the clamp is not fully closed (M3 Screws). Precision C.N.C. machined from 6061-T6 Aluminium. Made in USA. Stainless steel hardware. Black hard coat anodized surface. Can be used with various cameras read more

Hejnar Photo
$80.00

Multipurpose 14.00 inch rail with three (3) captive style slots, engraved metric scale, and bubble level. Rail can be used as: Mac...ro Rail, Lens Plate, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$66.00

Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent t...he tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S.and many other Arca style Quick release plates. Stainless steel hardware. Black hard coat anodized surface read more

Hejnar Photo
$65.00

Standard 3.25 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two outs...ide holes are taped 1/4-20 and 45mm apart from each other.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$80.00

Standard 6.00 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Built-in... spirit level provides improved alignment. Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$45.00

Multipurpose 6.00 inch rail with three (3) captive style slots and engraved metric scale. Rail can be used as: Macro Rail, Lens Pl...ate, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$65.00

Standard 2.375 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Built-i...n spirit level provides improved alignment. Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$65.00

Standard 2.375 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Built-i...n spirit level provides improved alignment. Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$80.00

Multipurpose 14.00 inch rail with three (3) captive style slots, and engraved metric scale. Rail can be used as: Macro Rail, Lens ...Plate, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$45.00

Multipurpose 8.00 inch rail with three (3) captive style slots and engraved metric scale. Rail can be used as: Macro Rail, Lens Pl...ate, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$65.00

Standard 4.00 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two outs...ide holes are taped 1/4-20 and 45mm apart from each other.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$56.00

Multipurpose 8.00 inch rail with two (2) captive style slots and engraved metric scale on each side, and bubble level. Rail is equ...ipped with taped 1/4-20 hole on end and two 5mm dowel pin openings. Pins prevent the clamp from twisting if mounted on rail end. Rail is also equipped along each side with M3 taped holes. You can mount screw type stop bar or other accessories. Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws) read more

Hejnar Photo
$55.00

Multipurpose 6.00 inch rail with two (2) captive style slots, engraved metric scale on each side, and bubble level. Rail is equipp...ed with taped 1/4-20 hole on end and two 5mm dowel pin openings. Pins prevent the clamp from twisting if mounted on rail end. Rail is also equipped along each side with M3 taped holes. You can mount screw type stop bar or other accessories. read more

Hejnar Photo
$65.00

Standard 2.375 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two out...side holes are taped 1/4-20 and 30mm apart from each other.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$65.00

Standard 4.00 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two outs...ide holes are taped 1/4-20 and 45mm apart from each other.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$70.00

Standard 2.375 Inch Dual Side Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-1...6. Clamp works with rails with different width dimension and from different manufactures. If you use identical rails they will aligning with clamp center on each side. Deep relief grooves guarantee compatibility with most plates and rails. Relief groove prevents free fall when the clamp is not fully closed and your plate has safety stops. Knob is captive. Knob stops at maximum opening - cannot be lost in the fiel d.Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates and clamps. Made in USA read more

Hejnar Photo
$56.00

Multipurpose 6.00 inch rail with one(1) captive style slots, engraved metric scale on each side, and bubble level. Rail is equippe...d with taped 1/4-20 hole on end and two 5mm dowel pin openings. Pins prevent the clamp from twisting if mounted on rail end. Rail is also equipped along each side with M3 taped holes. You can mount screw type stop bar or other accessories. 6.00 inches long. 1.5 inches wide. 5/8 inch thick. Weight 5.5 oz (155g). Captive screw can be inserted into slot from each end. Rail incorporates a double-dovetail Hole in front for lens support or other accessories. (1/4-20 tap hole) Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws). Precision C.N.C. machined from 6061-T6 Aluminium. Compatible with Really Rihht Stuff, Kirk,Arca Swiss Markins, Wimberley and many others Arca type clamps read more

Hejnar Photo
$90.00

8 inch lens support package includes an 8 inch rail (G010-80) and a lens support bracket (LLSB). This setup can dramatically impro...ve the stability of your camera/lens combo. Bracket Specifications: 3.75 inches long. 2.50 inches wide. Weight: 2.70 oz (76g)One captive style slot. Double-dovetail design allows for dual clamping surfaces. Can be used with various lenses. Rail Specifications:8.00 inches long. 1.50 inches wide. 1/2 inch thick. Weight: 4.1 oz (115g). Engraved metric scale. 1/4-20 tapped hole in front for lens support or other accessories. Three captive style slots. read more

Hejnar Photo
$48.00

The lens support bracket can be used in combination with various rails to improve the stability of your lens barrel. The rail shou...ld have a 1/4-20 tapped hole on the end in order to mount the support bracket. If you use the bracket with various lenses you can mount a clamp onto the rail for quick height adjustments. read more

Hejnar Photo
$45.00

Multipurpose 8.00 inch rail with three (3) captive style slots and engraved metric scale. Rail can be used as: Macro Rail, Lens Pl...ate, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$38.00

2.375 inch camera plate with one strap loop. One captive style slot. Two safety stop screws. This prevents free fall when the clam...p is not fully closed (M3 Screws) read more

Hejnar Photo
$38.00

Hejnar Photo Arca Type Quick release plate for Nikon 80-200/f2.8. One captive style slot. It allows you to balance your lens/camer...a. Two safety stops. This prevents free fall when the clamp is not full closed. (M3 Screws)Precision C.N.C. machined from 6061-T6 Aluminium. Black hard coat anodized surface.Stainless steel hardware.Made in USA read more

Hejnar Photo
$65.00

Standard 2.375 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two out...side holes are taped 1/4-20 and 30mm apart from each other.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$70.00

Multipurpose 10.00 inch rail with three (3) captive style slots and engraved metric scale. Rail can be used as: Macro Rail, Lens P...late, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$65.00

Standard 2.375 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Built-i...n spirit level provides improved alignment. Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$45.00

Standard 1.50 Inch Arca Type Clamp. Center hole is taped 1/4-20.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design th...at protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Made in USA. read more

Hejnar Photo
$65.00

Standard 2.375 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two out...side holes are taped 1/4-20 and 30mm apart from each other.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$100.00

10 inch lens support package includes a 10 inch rail (G010-10) and lens support bracket (LLSB). This setup can dramatically improv...e the stability of your camera/lens combo. Bracket Specifications: 3.75 inches long2.50 inches wide. Weight: 2.70 oz (76g).One captive style slot. Double-dovetail design allows for dual clamping surfaces. Can be used with various lenses. Rail Specifications:10.00 inches long. 1.50 inches wide. 1/2 inch thick. Weight: 4.6 oz (131g)Engraved metric scale1/4-20 tapped hole in front for lens support or other accessories. Three captive style slots. read more

Hejnar Photo
$75.00

Multipurpose 12.00 inch rail with three (3) captive style slots, engraved metric scale, and bubble level. Rail can be used as: Mac...ro Rail, Lens Plate, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$90.00

Two clamps can mounted together back to back using aligning pins and bushing. Clamps can be mounted in different orientation. Pins... will prevent clamp from twisting . Set can not be assembled with knobs facing the same direction. When clamps are disassembled they work as standard arca type clamp read more

Hejnar Photo
$80.00

Multipurpose 12.00 inch rail with three (3) captive style slots and engraved metric scale. Rail can be used as: Macro Rail, Lens P...late, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$65.00

Standard 3.25 Inch Arca Type Clamp. Center socket is countersunk on top for 1/4-20 or M6 screw, but also threaded 3/8-16. Two outs...ide holes are taped 1/4-20 and 45mm apart from each other.Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal parts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates. Made in USA. read more

Hejnar Photo
$100.00

Multipurpose 16.00 inch rail with three (3) captive style slots, engraved metric scale, and bubble level. Rail can be used as: Mac...ro Rail, Lens Plate, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$85.00

Standard 1.50 Inch Arca Type Clamp Set. Tongue-in-pocket Design - Clamps have a tongue-in-pocket design that protects internal par...ts from dust and grit. It does prevent the tendency of the moving jaw to hinge backward during clamping, It keeps the jaws aligned with the geometry of the plate and eliminating unwanted bending forces on the threaded stud. Made in USA. read more

Hejnar Photo
$45.00

Multipurpose 6.00 inch rail with two (2) captive style slots and engraved metric scale. Rail can be used as: Macro Rail, Lens Plat...e, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$38.00

Quick release plate for Nikon 70-200/f2.8 VR and VR II. Double-dovetail design allows for dual clamping surfaces on rail. Two safe...ty stops. This prevents free fall when the clamp is not full closed. (M3 Screws) Precision C.N.C. machined from 6061-T6 Aluminium. Black hard coat anodized surface. Stainless steel hardware. Made in USA read more

Hejnar Photo
$45.00

Multipurpose 8.00 inch rail with three (3) captive style slots and engraved metric scale. Rail can be used as: Macro Rail, Lens Pl...ate, Single or multiple Flash support in combination with Flash Shoe Mount, Long lens support- combine with lens support plate. read more

Hejnar Photo
$38.00

New Hejnar Photo Quick Release Arca Type Lens Plate for Nikon AF-S NIKKOR 200-500mm f/5.6E ED VR Lens. All single mounting hole le...nses required anti twisting future to prevent lens rotating when mounted. It is the best quick release system for tripods and monopods when combined with Arca style ball head and quick release clamps. International standard dove-tail rail, compatible with Arca-Swiss type quick release clamps. read more

Hejnar Photo
$120.00

6 inch lens support package with quick height adjustment includes a 6 inch rail, lens support bracket, and 1.00 inch clamp (F60b).... The clamp is mounted to the rail end with a single screw and dowel pin. The lens supporting bracket is mounted inside the clamp for quick height adjustment. This setup can dramatically improve the stability of your camera/lens combo read more