IndiPRO Camera Bags & Accessories

Refine By
IndiPRO
$95.00

The IndiPRO Tools Power Grid System Dual Canon LP-E6 Type Batteries Battery Plate powers your Blackmagic Pocket Cinema Camera usin...g two available Canon LP-E6 type batteries. The Plate incorporates a clamp so you can mount it to LWS 15mm support rods and it features a right angle power plug to keep the cable neat and snug on the camera. The plate itself features a two-sided design that mounts the batteries one on each face, two batteries are required to supply the necessary voltage to power the camera. The batteries securely snap in to the plate and you must press a small tab to remove them. A green LED built into the plate lights up to indicate sufficient voltage to power for the camera. When used in conjunction with the camera's internal battery, you can hot swap the batteries without powering down the camera. read more

IndiPRO
$47.00

The 2.5mm DC Power Cable to Regulated GH4 / GH3 Dummy Battery from Indipro Tools is a 2' cable that terminates in a regulated GH4 .../ GH3 type dummy battery which fits into one of the battery-slots of a Power Pod Dual/Quad system (sold separately). The other end of the cable has a 2.5mm barrel connector. The cable is polarity tested with the Indipro Power Pod Dual & Quad Systems, preventing the risk of crossed polarity when powering your camera. Although you can use this cable to connect other optional power solutions with a 2.5mm connector to power your device, this cable has only been polarity tested with the Indipro Tools Power Pod Dual & Quad Systems. read more

IndiPRO
$99.00

The IndiPRO Universal Power Pod System with Two Battery Mounts is specially designed for Canon LP-E6 type batteries and one Sony N...P-FW50 dummy battery for Sony A7S/A7RII camera. read more

IndiPRO
$69.99

The 30" long regulated Mini-Tap to LP-E6 Type Dummy Battery provides power to an optional camera or device. The cable is regulated... to provide the correct voltage to your camera and in addition the in-line voltage regulator helps prevent electrical noise from being introduced into your camera. There is also a USB port that outputs 5 volts of power at up to 2 amps, enabling it to power most USB devices on set, including smart phones and some tablets. Also a female D-tap output is also offered, so you can still power you D-tap accessories while using the D-USB and power out cable. Made in the USA. read more

IndiPRO
$158.49

IndiPRO Tools Dual Sony L-Series Power System to Canon LP-E6 Dummy Battery This 12 Volt Regulated Dual Sony L- Series Power System... extends your run time on your Canon LP-E6 powered device by using two available Sony NP-F type batteries. This unit comes with a Canon LP-E6 type Dummy Battery which is compatible with a variety of cameras/ devices. This power system has two regulated 2.5mm jacks that output 12Volts. The Plate incorporates a 15mm rod clamp so you can mount it to LWS 15mm support rods. The plate itself features a two-sided design that mounts the batteries one on each face, two batteries are required at all times to supply the necessary voltage to power your Canon LP-E6 powered device. The batteries securely snap in to the plate and a release tab must be pressed to release the batteries. A blue LED built into the plate lights up to indicate sufficient voltage to power the unit. This unit is an extremely cost effective power system for those who already own Sony L-Series batteries. Made in USA. read more

IndiPRO
$389.00

IndiPRO Tools Four Bay Pro Battery Charger for Gold-Mount Batteries Offering an efficient charging and powering solution in a port...able design, this Quad Pro Battery Charger provides simultaneous charging for up to 4 Li-ion V-mount batteries and features a 4-pin XLR power output. It features a carry handle for easy transport, and an On/Off switch and LED status indicators for convenient management. This charger delivers 2.5A per channel when charging multiple batteries and the same when charging a single battery.The 4-pin XLR power output can be used to power select cameras from an AC power outlet, and an XLR cable is included, giving you everything you need to make full use of this charger. The charger supports 100-240 VAC power input. read more

IndiPRO
$389.00

ndiPRO Tools Four Bay Pro Battery Charger for V-Mount Batteries Offering an efficient charging and powering solution in a portable... design, this Quad Pro Battery Charger rovides simultaneous charging for up to 4 Li-ion V-mount batteries and features a 4-pin XLR power output. It features a carry handle for easy transport, and an On/Off switch and LED status indicators for convenient management. This charger delivers 2.5A per channel when charging multiple batteries and the same when charging a single battery.The 4-pin XLR power output can be used to power select cameras from an AC power outlet, and an XLR cable is included, giving you everything you need to make full use of this charger. The charger supports 100-240 VAC power input. read more

IndiPRO
$149.99

IndiPRO Tools V-Mount Plate to Canon LP-E6 Dummy Battery with 1/4-20 Insert Power your Canon LP-E6-powered devices from a V-Mount ...battery using this V-Mount Plate. The plate features a Canon LP-E6 dummy battery at the end of an integrated 20" cable. Other accessories that require 12-16 volts of power can be connected to the built-in D-Tap on the plate. For rig integration, this battery plate includes a ¼-20 insert for easy mounting onto any rig set-up. Made in the USA. read more

IndiPRO
$149.99

IndiPRO Tools Gold-Mount Plate to Nikon EN-EL15 Dummy Battery with 1/4-20 Insert Power your Nikon devices from a Gold-Mount batter...y using this Gold-Mount Plate. The plate features a Nikon EN-EL15 type dummy battery at the end of an integrated 20" cable. Other accessories that require 12-16 volts of power can be connected to the built-in D-Tap on the plate. For rig integration, this battery plate includes a ¼-20 insert for easy mounting onto any rig set-up. Made in the USA. read more

IndiPRO
$149.99

IndiPRO Tools Gold-Mount Plate to Canon LP-E6 Dummy Battery with 1/4-20 Insert Power your Canon LP-E6-powered devices from a Gold-...Mount battery using this Gold-Mount Plate. The plate features a Canon LP-E6 dummy battery at the end of an integrated 20" cable. Other accessories that require 12-16 volts of power can be connected to the built-in D-Tap on the plate. For rig integration, this battery plate includes a ¼-20 insert for easy mounting onto any rig set-up. Made in the USA. read more

IndiPRO
$203.80

IndiPRO Tools Dual Sony L-Series Power System to Panasonic DMW-BLF19 Dummy Battery This 12 Volt Regulated Dual Sony L- Series Powe...r System extends your run time on your Panasonic DMW-BLF19 powered device by using two available Sony NP-F type batteries. This unit comes with an Panasonic DMW-BLF19 type dummy battery cable which is compatible with a variety of Panasonic devices. This power system has two regulated 2.5mm jacks that output 12Volts. The Plate incorporates a 15mm rod clamp so you can mount it to LWS 15mm support rods. The plate itself features a two-sided design that mounts the batteries one on each face, two batteries are required at all times to supply the necessary voltage to power your Panasonic DMW-BLF19 powered device. The batteries securely snap in to the plate and a release tab must be pressed to release the batteries. A blue LED built into the plate lights up to indicate sufficient voltage to power the unit. This unit is an extremely cost effective power system for those who already own Sony L-Series batteries. Made in USA. read more

IndiPRO
$149.99

IndiPRO Tools V-Mount Plate to Nikon EN-EL15 Dummy Battery with 1/4-20 Insert Power your Nikon EN-EL15-powered devices from a V-Mo...unt battery using this V-Mount Plate. The plate features a Nikon EN-EL15 dummy battery at the end of an integrated 20" cable. Other accessories that require 12-16 volts of power can be connected to the built-in D-Tap on the plate. For rig integration, this battery plate includes a ¼-20 insert for easy mounting onto any rig set-up. Made in the USA. read more

IndiPRO
$149.00

IndiPRO Tools V-Mount Plate To Sony L Type Dummy Battery Regulated (24") Power your Sony L-Series powered devices from a V-Mount b...attery using this V-Mount Plate. The plate features a Sony L-Series type dummy battery at the end of an integrated 24" cable. This dummy battery will work with a variety of Sony L-Series powered devices. Other accessories that require 12-16 volts of power can be connected to the built-in D-Tap on the plate. For rig integration, this battery plate includes a 15mm LWS bracket for mounting on a lightweight 15mm compatible rod-based rig. In this configuration, the battery attached to the plate can be used as a counterweight for shoulder-mounted setups. Made in the USA. read more

IndiPRO
$203.87

IndiPRO Tools V-Mount Plate to Neutrik 4-Pin XLR Connector with 1/4-20 Insert Power your camera or other 4-pin XLR device from a V...-Mount battery using this V-Mount Plate. The XLR connection is integrated into the plate by way of a 20" cable. Other accessories that require 12-16 volts of power can be connected to the built-in D-Tap on the plate. For rig integration, this battery plate includes a ¼-20 insert for easy mounting onto any rig set-up. Made in the USA. read more

IndiPRO
$149.99

IndiPRO Tools Gold-Mount Plate to Neutrik 4-Pin XLR Connector with 1/4-20 Insert Power your camera or other 4-pin XLR device from ...a Gold-Mount battery using this Gold-Mount Plate. The XLR connection is integrated into the plate by way of a 20" cable. Other accessories that require 12-16 volts of power can be connected to the built-in D-Tap on the plate. For rig integration, this battery plate includes a ¼-20 insert for easy mounting onto any rig set-up. Made in the USA. read more

IndiPRO
$55.37

IndiPRO Tools 2.5mm to Sony NP-FW50 Dummy Battery (24", Non-Regulated) The 24" long non-power-regulated 2.5mm to Sony NP-FW50 type... Dummy Battery Cable is for use with an optional 7.2 V Power Systems to provide power to an optional Sony a7. Made in the USA. read more

IndiPRO
$349.99

Keep your Blackmagic URSA powered with this V-Mount Battery, Plate & Charger Kit from IndiPRO Tools. Included in this kit is a 95 ...Wh Lithium-Ion V-Mount battery and D-Tap Pro Battery Charger along with a Blackmagic URSA battery plate. The plate incorporates an V- Lock that connects directly to the back of the URSA, avoiding the need for extra cabling. The following is a more in depth breakdown of the items in this exclusive kit: Compact 95Wh V-Mount Li-Ion Battery This Compact 95Wh V-Mount Li-Ion Battery from IndiPRO Tools outputs 14.8V, has a capacity of 6.6Ah and supports up to a 10A draw. Its features include a Samsung cell, a weight of slightly more than 1.5 pounds and a standard D-Tap port for powering accessories via a separately available cable. This is an IATA carry-on approved battery, simplifying your travel options. For quick status checks, an integrated 4-bar LED gauge displays the battery's remaining power. D-Tap Pro Battery Charger (16.8V, 2.5A) The D-Tap Pro Battery Charger from IndiPRO Tools is designed to charge batteries with D-Tap connectors that can be charged via the D-Tap. These include select V-Mount, Gold Mount or IndiPRO PD style batteries. This charger is lightweight and compact in size and offers 16.8V output. V-Mount Adapter Plate for Blackmagic Design URSA/URSA Mini This V-Mount Battery Plate for Blackmagic Design URSA/URSA Mini allows you to attach third party V-Mount batteries to your read more