CALANDRA RACING CONCEPTS CRC Toys & Activities

Refine By
CALANDRA RACING CONCEPTS CRC
$12.11

== Key Features ==* Protects a racer's investment and keeps the chassis in good shape* Helps to reduce front tire chunking== Overv...iew ==Made from the same stiff, dense, durable foam material that the 10th scale bumper is made from. This bumper will help protect your investment and keep that chassis and body in good shape. Fits CRC 1:12th cars and others like the Assoc 12R5. One thing this wider bumper does that the 3259 does not, is help keep the body out of the front tires and helps to reduce front tire chunking. CalandraPart CLN3260 read more

CALANDRA RACING CONCEPTS CRC
$6.82

Calandra Racing Concepts (CRC) CRC Standoff 1/2, CLN1260

CALANDRA RACING CONCEPTS CRC
$8.64

== Key Features ==* Pivot ball made from real Bronze== Overview ==CRC's Bronze Pivot Balls for the Pro-Strut Front End's lower arm... are just about "bomb proof". The slightly larger OD fits the lower arm better than the delrin balls, even without the clamp screw installed. Plus, as the arm wears and you need to adjust the clamp screw, it doesn't squeeze the balls and pinch the king pin because the bronze material is much stronger than the delrin. The precision machined hole in the ball is perfect for the CRC king pins as well. CalandraPart CLN32462 read more

CALANDRA RACING CONCEPTS CRC
$12.17

CRC's low roll center side link balls, now in a Hard Anodized Coating. Much smoother and longer lasting than the conventional colo...red anodizing. read more

CALANDRA RACING CONCEPTS CRC
$8.54

These longer one-piece links with ball clamps adjust the fit to your side link balls for a super-free, no slop fit. Works with Gen...-X 10 & Battle Axe. CalandraPart CLN3280 read more

CALANDRA RACING CONCEPTS CRC
$9.42

CRC's molded spur gears use a 16 ball design to increase contact surface so your diff nut requires less tension to keep the diff f...rom slipping. Less tension on the diff parts means more racing and less rebuilding! These gears also use 3/32" balls rather than 1/8" to keep the rotating weight down and not sacrifice punch by adding the extra balls. read more

CALANDRA RACING CONCEPTS CRC
$8.64

This part mounts to the standard-sized Kimbrough servo saver eliminating the constant issue of the saver breaking in a crash. Cala...ndraPart CLN4088 read more

CALANDRA RACING CONCEPTS CRC
$23.28

1/8 x 5/16 Flanged Bearings (10) CLN1248 CLN1248 CALANDRA RACING CONCEPTS (CRC)

CALANDRA RACING CONCEPTS CRC
$6.85

These molded side spring retainers are awesome, far superior to the old metal spring holders. Lightweight, easy to pop the spring ...on, and there is a groove molded into them for the coil of the spring to set into so the spring is not tweaked to the side. CalandraPart CLN3387 read more

CALANDRA RACING CONCEPTS CRC
$10.40

High roll, center side link balls for CK version 3 cars. Stock replacement balls for CK V3 series when not using low roll center k...it. CalandraPart CLN1407 read more

CALANDRA RACING CONCEPTS CRC
$29.91

Overview WILL fit both versions of Gen-X10 chassis WILL fit Battle Axe as well - and works very well for mounting oval truck bodie...s that tend to have a shorter nose than the car bodies. read more

CALANDRA RACING CONCEPTS CRC
$29.22

FR 156 ZZ - Flanged 3/16 x 5/16 bearing. This bearing is used for the front wheels on the CRC Pro-Strut front end, which comes sta...ndard in the Generation X 1/12th car. CalandraPart CLN3248 read more

CALANDRA RACING CONCEPTS CRC
$8.64

These screws are used for the upper arm mount when using molded plastic ride height spacers under the arm, but no front end brace ...above the arm. CalandraPart CLN1453 read more

CALANDRA RACING CONCEPTS CRC
$11.00

== Key Features ==* Hard Anodized Coating* Long lasting== Overview ==CRC's T-Bar / Center Pivot Ball, now in a Hard Anodized Coati...ng. Much smoother and longer lasting than the conventional colored anodizing. CalandraPart CLN40194 read more

CALANDRA RACING CONCEPTS CRC
$21.58

Trued rear foams for 1/12th scale in Magenta compound Two tires per pack

CALANDRA RACING CONCEPTS CRC
$19.81

4mm thick top plate for the Gen-X 10, Gen-X 12 (B/L offset pod only), and Battle Axe. Much stronger than the stock piece. Longer s...crews includedCalandraPart CLN1764 read more

CALANDRA RACING CONCEPTS CRC
$7.52

These 4-40 brass set screws are used to lock the king pin in the steering block. The softer brass material prevents damage to the ...hardened king pin. CalandraPart CLN3234 read more

CALANDRA RACING CONCEPTS CRC
$19.81

This is an optional CRC Graphite Roll Center Adjuster Set, and is intended for use with the any car using a Calandra Racing Concep...ts front end. These roll center adjusters allow you to raise the upper arm taking away camber gain. Less camber gain will calm an aggressive front end on a high bite track. This is particularly useful on the Xti as it is difficult to use the long upper arm conversion. The thicker the spacer, the less camber gain (flatter upper arm). This will make your car more round and smooth in the corners of a high bite track. For the most front end grip on low traction, leave the stock arrangement. read more

CALANDRA RACING CONCEPTS CRC
$12.75

== Key Features ==* Extra firm foam== Overview ==Extra firm foam bumper for the Gen-X 10 & Battle Axe. Pre-formed to match the sha...pe and holes of your Gen-X 10 or Battle Axe Graphite bumper. Will slide down over your body posts, no matter which holes you read more